The Canon Service Tool v3600 is the exact software used by authorized service centers to reset this electronic counter back to 0%. Compatible Canon Printer Models
Release the button. The printer's LED light will flash green and orange, then stay on a solid green. This indicates it is now in Service Mode . Phase 2: Running the Service Tool v3600 Open the Service_tool_v3600.exe program. Ensure your printer is detected. Load at least two sheets of paper into the printer. In the tool's panel, find the Absorber section. Click the dropdown menu for Absorber and select Main . Click the Set button next to it.
While holding Resume, press and hold the Power button. Do not release either button. Canon service tool v3600
Disclaimer: Use of third-party service tools is at your own risk. This information is for educational purposes.
While holding Stop/Reset, press and hold the button. The power LED will light up. The Canon Service Tool v3600 is the exact
This is the most common error, indicating that the tool failed to communicate with the printer. This means the printer is not in Service Mode. Try entering Service Mode again, or turn off the printer and try again.
Click the button directly to the right of the Absorber dropdown. This indicates it is now in Service Mode
How to reset page counter for ink absorber full (error 5B00)? - iFixit
The tool should display "A function was finished," indicating success. Turn off the printer and restart it. Troubleshooting and Crucial Notes
Before turning to service tools, try these official or safer methods:
If done correctly, the printer's lights will behave differently than during normal operation, indicating it is now in Service Mode. The power LED may stay lit or blink steadily. It is often recommended to before proceeding to the next stage.