Disco 240 Dmx Controller Manual

The Disco 240 is a workhorse for mobile DJs, small clubs, and stage productions. By mastering the 20-channel fixture allocation and the scene-to-chase workflow, you can create professional-grade light shows with ease.

: Always connect the console to a grounded safety earth line. Never plug or unplug DMX cables while the power is on.

Link the remaining fixtures in a daisy-chain formation ( of the first to IN of the second, and so forth).

Avoid use in humid rooms or outdoors. If condensation occurs, let the unit reach room temperature before powering on disco 240 dmx controller manual

To clear memory and reset to factory settings, turn the power off, hold the Bank Up and Auto/Del buttons simultaneously, and turn the power back on.

Controls the DMX values of channels (e.g., pan, tilt, color, dimmer).

These buttons select or program sequences of scenes, known as chases. You can run multiple chases simultaneously or sequentially. The Disco 240 is a workhorse for mobile

Before we start programming, it is helpful to confirm you have all the necessary components. Standard packaging for the Disco 240 usually includes:

If you want, I can expand any section into a full printable manual with diagrams, pinouts, and channel-mapping examples.

Each fixture must have a unique starting address to receive specific commands. On a standard 16-channel offset: : Address 1 Scanner 2 : Address 17 Scanner 3 : Address 33 Scanner 4 : Address 49 (and so on) 3. Programming Scenes Scenes are "snapshots" of your light positions and colors. Never plug or unplug DMX cables while the power is on

Ensure your fixtures are addressed properly (e.g., Fixture 1 at DMXcap D cap M cap X , Fixture 2 at DMXcap D cap M cap X , assuming 20 channels per fixture).

Located on the right side, these trigger pre-programmed sequences of scenes. 2. Setting Up Your DMX Chain

The controller features 30 banks, each capable of storing up to 8 distinct scenes (240 total scenes).