Troubleshooting the "DVB Select Type" Error on Samsung TVs Seeing a error or prompt on your Samsung TV can be frustrating, especially when it prevents you from accessing your favorite digital channels. This issue typically occurs during initial setup, after a software update, or when the TV's internal tuner loses its configuration.
If prompted specifically for "Digital Channel Type" or "DVB Select Type," choose for antenna or DVB-C for cable. 3. Run a New Channel Scan After selecting the correct type, select Start or Scan . Allow the TV to search from 0% to 100%.
The most common cause of this error is an incorrect broadcast source selection during the initial setup. Press the or Source button on your Samsung remote. Navigate to Settings > All Settings > Broadcasting . Select Auto Tuning or Channel Scan .
If an update is found, allow the TV to download and install it. Do not turn off the TV during this process. dvb select type error samsung tv
The "Broadcasting" and "Auto Tuning" menus are often only accessible when the TV is set to the correct source. button on your remote. Navigate to Connected Devices JustAnswer 2. Perform a Full Auto-Tune
A simple power cycle can clear temporary firmware glitches [2].
Alternative method: Unplug the TV from the wall outlet, wait 2 full minutes, plug it back in, and turn it on. 2. Verify Physical Cable Connections Troubleshooting the "DVB Select Type" Error on Samsung
For manufacturers/Firmware teams:
Broadcast frequencies in your local area have changed, making your saved channel list obsolete.
Don't worry; we've got you covered! Follow these troubleshooting steps to resolve the DVB select type error on your Samsung TV: The most common cause of this error is
Are you currently stuck on this screen during , or did it appear randomly while watching? Samsung TV or projector has grayed out menu options
The "DVB Select Type" error on Samsung TVs typically occurs when the television's internal digital tuner encounters a mismatch between the broadcast signal type (e.g., DVB-T, DVB-C, or DVB-S) and the user's selected input or hardware configuration
This is the most direct solution. You need to manually tell the TV which signal type to scan for.