Erba Xl 200 Service Manual Exclusive Jun 2026
Install clean, unused cuvettes or a dedicated calibration quartz cuvette filled with distilled water. Initiate the .
Whether you are attempting a routine procedure or a major component replacement .
Adherence to this preventative maintenance matrix ensures instrument longevity and compliance with laboratory quality standards. Target Component Action Required Probe Assembly Wipe down with alcohol; inspect for bends or crimps. Waste Lines Flush with bleach solution to prevent biofilm buildup. Water Reservoir erba xl 200 service manual exclusive
Wipe the sample probe and mixing paddle with 70% isopropyl alcohol.
Measure the resistance across the heating element (normal range: 10–20 Ohms). Check the 37°C control relay on the main driver board. Install clean, unused cuvettes or a dedicated calibration
Specialized guides for diagnosing error codes and replacing hardware components. Key Technical Specifications
| | Likely Cause (per Service Manual) | Suggested Fix | | :------------------------------ | :----------------------------------------------------------------------- | :-------------------------------------------------------------------------------------------------------- | | "Reagent Volume Monitoring" | Air bubble in reagent line or empty bottle (the software monitors volume) | Perform a "Prime" operation for the relevant reagent channel. Check bottle caps for tight seals. | | High Background Absorbance | Dirty cuvette window or aging UV lamp | Run an intensive cuvette wash cycle. Use the service menu to check lamp voltages (adjust if necessary). | | Inaccurate ISE Results | Protein buildup in the flow cell or clogged reference junction | Flush the system with XL ISE Cleaning Solution . Perform a full electrode conditioning cycle. | | Probe Crash Error | Bent probe or debris on the sample tray (Crash Detector triggered) | Inspect probe alignment visually. Use the "Jog" commands in the service software to re-home the arm. | | Water Conductivity Low | Degraded deionized water filter or empty water supply | Replace the water filters. The water consumption is typically < 7.5 liters/hour. | Water Reservoir Wipe the sample probe and mixing
A key reason to seek the is to resolve equipment issues:
Single probe for sample/reagent with liquid level and clot detection Erba EM 200: Reliable Biochemistry Testing Solution - Flabs
