Before MPtools:
Scans the NAND flash, identifies unstable memory cells, and excludes them from the usable partition.
Several technical forums host downloadable versions: firstchip fc1178 fc1179 mptools v1052
Tool detects controller and flash ID but cannot initialize NAND or build block map. Windows Disk Management shows "Removable – No Media".
Do not unplug the drive. The status bar will turn green (Pass) or red (Fail). Common Troubleshooting Before MPtools: Scans the NAND flash, identifies unstable
Comprehensive Guide to FirstChip FC1178 & FC1179 MPTools v1.0.5.2
Before opening the software, verify that your USB drive actually contains a FirstChip FC1178 or FC1179 controller. Download a hardware diagnostic utility such as or Flash Drive Information Extractor (FDIE) . Insert your broken drive, run the diagnostic, and look for the following lines: Controller Vendor: FirstChip Controller Part-Number: FC1178, FC1178BC, or FC1179 Step 2: Download and Environment Setup Do not unplug the drive
In the section, choose whether you want to optimize for Capacity (maximizing space by using strict error-correction limits) or Speed (isolating slower sectors to keep transfer rates high). Save the configuration and return to the main dashboard. Step 5: Execute the Mass Production Process
For flash drives built with and FC1179 controllers, MPTools v1.0.5.2 is the specialized factory software designed to rewrite firmware, map out bad sectors, and restore dead drives to full functionality. Understanding the Hardware: FirstChip FC1178 and FC1179
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Firmware download to controller fails – often due to communication issues.