Hdl Buspro Setup Tool 2 【2025-2027】

If using IP, ensure your PC’s IP address is in a similar range to the gateway (default is often 192.168.1.xxx).

Select , choose your local network interface card (NIC), and enter the IP address of your Buspro Gateway.

If multiple new modules share the same default address, they will conflict on the bus lines. To fix this, connect modules one by one, or use the physical on the device hardware. Pressing the physical button isolates that specific device within the software interface, allowing you to instantly assign it a unique Subnet and Device ID (e.g., Subnet 1 , Device 10 for a relay module). Project Organization

Map wall panel thermostats to read temperature values from physical network sensors. hdl buspro setup tool 2

For situations where you need to prepare configurations without being connected to the live system, the software includes an offline mode. This allows you to plan and configure component settings even when you don't have physical access to the automation hardware. This feature is particularly valuable for system design and pre-configuration work.

Represents a physical line, floor, or zone (values from 1 to 254).

In the Setup Tool 2, you can create scenes within your relay or dimming modules. For example, a "Movie Night" scene sets Channel 1 to 20%, Channel 2 to 0%, and triggers a motorized curtain module to close. If using IP, ensure your PC’s IP address

Label each channel with a descriptive name (e.g., "Kitchen Downlights", "Living Room Chandelier").

For existing Buspro systems, the Setup Tool 2 continues to be the appropriate configuration tool, particularly for:

Specify the parameter value (e.g., Value 1: 100 for full brightness, or 0 for off). Click to write the programming data over the bus. 4. Advanced Features within Setup Tool 2 Scene and Sequence Programming To fix this, connect modules one by one,

The software provides a secure way to update the firmware of all Buspro devices, ensuring the system operates with the latest features and security patches. It also includes diagnostic tools to check the status of the network, monitor traffic, and troubleshoot issues. 5. Project Management

Once addressing is finalized, the bulk of your time in Setup Tool 2 is spent configuring the functional behavior of individual modules. 1. Configuring Relays and Dimmers Double-click a Relay or Dimmer module from the Device Tree. Go to .

The Ultimate Guide to HDL Buspro Setup Tool 2: Configuration and Troubleshooting