The indicator light will change to a mix of red and blue (or solid red, depending on the firmware version).
: Avoid operating or storing the unit in extreme environments (below 0°C or above 40°C).
Fully charge the camera using the USB cable before first use. The blue light typically indicates it is charging, and turns off when finished.
When an object moves in front of the lens, the camera automatically triggers a 5-minute video clip. Infrared (IR) Night Vision hicam h6 mini dv operating manual
Look for a text file named time.txt or TIMEREST.txt . If it does not exist, create a new text file named exactly time.txt .
Powering On/OffPower On: Press and hold the Power button for about 3 seconds. The indicator light will turn on (usually blue), indicating the device is in standby mode.Power Off: Press and hold the Power button for 5 seconds. The light will flash and then turn off.
Avoid exposing the camera to extreme temperatures, as this can damage the battery. The indicator light will change to a mix
: Yellow and blue lights will light up together, then flash. : Press the button for until the indicator lights turn off. Start Recording
Press and hold the Power button for 2–3 seconds. The indicator light will turn on (usually solid Blue or Red depending on the default mode), indicating standby status.
: Press the ON/OFF button once. The blue light returns to solid (Standby Mode). 1080p Video Recording The blue light typically indicates it is charging,
The indicator light color will change (e.g., from Blue to Red, or solid Purple).
Press the Power Button once to take a photo. The red light will flash once for each photo captured. Motion Detection Mode
Plug the other end into a 5V/1A power adapter or a computer USB port.
Try a different USB cable or another port directly on the motherboard.