Installing A Sata Hard Drive Top -

Select NTFS (the standard standard for Windows). Allocation Unit Size: Leave as Default .

Flip the switch on the back of your power supply (if applicable) and unplug the main power cable from the wall outlet.

How you secure the drive depends entirely on your specific PC case design. Method A: Toolless Drive Caddies (Modern Cases) installing a sata hard drive top

Press and hold the PC's physical power button for 5 to 10 seconds to drain any electricity left in the capacitors.

The Ultimate Guide to Installing a SATA Hard Drive in Your Desktop PC Select NTFS (the standard standard for Windows)

A standard size #2 screwdriver fits most PC chassis screws.

Safety first: your PC and flip the switch on the back of the power supply. Unplug the power cable and press the PC's power button once to drain any leftover electricity. Open your case by removing the side panel. 2. Mount the Drive How you secure the drive depends entirely on

A 7-pin data cable (usually flat and red, black, or blue) to connect the drive to the motherboard.

Your motherboard lacks M.2 slots, but you want silent, shock-resistant, and fast (500 MB/s) performance for a legacy system.

If you run into issues during setup, let me know. I can help you troubleshoot if the or if you need to configure BIOS/UEFI settings .

Locate the SATA power connector from your power supply unit (wider than the data connector) and plug it into the drive. Phase 3: Finalizing Hardware Installation