Before programming, ensure your remote is ready.
The are extensive, but success depends on patience and using the right method. Always start with Method 1 (Direct Code Entry) using the highest-priority codes: 1193 , 0159 , and 0718 for TVs. If those fail, use the Auto-Search method. jensen universal remote codes jer 422
| Problem | Possible Cause & Solution | | :--- | :--- | | | Check the batteries. Remove any obstacles between the remote and the device's sensor. | | Device turns on, but some buttons don't work | Another code in the list may work better. Try the Direct Code Entry or Manual Code Search again to find a better match. | | Codes were lost after battery change | The 10-minute memory backup was exceeded. You will need to reprogram the remote. | | ON•OFF key blinks 4 times and turns off during search | The remote has cycled through all available codes without finding a match. You should try a different programming method. | Before programming, ensure your remote is ready
: If a code turns the TV on but the volume doesn't work, repeat the process and try the next code in the list for that brand. 1.3.2 If those fail, use the Auto-Search method
: Point it at the device and press the Power button. If the device turns off, the programming was successful. 2. Auto Code Search
Note: Universal-remote code lists differ by manual and firmware; try multiple codes if one doesn’t work.