Motorola Gm360 Programming Software [updated] -

Create groups of channels for the radio to monitor simultaneously.

Connect the programming cable to the PC and the radio’s mic jack. Turn the radio on.

Motorola GM360 is programmed using the Motorola Professional Radio Customer Programming Software (CPS) , specifically the version designed for the GP300/GM300 series

Connect the programming cable to your PC's USB or Serial port. motorola gm360 programming software

Older versions of this software often run best on Windows XP or Windows 7. If you're on a newer system, you may need to use compatibility mode or a virtual machine. 🛠️ Key Programming Steps

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Software alone is not enough to program a GM360. You must assemble a complete programming kit to establish a data connection between your PC and the mobile radio unit. Create groups of channels for the radio to

Run the installer for the Motorola Professional Series CPS.

Plug the USB end into your PC and the RJ45 connector into the microphone port on the front of the GM360. Power on the radio.

Here is the biggest headache:

Search for a "USB Programming Cable for Motorola GM300/GM340/GM360" . Ensure it comes with a 15-pin connector (not the 2-pin microphone connector). The cable should use a genuine FTDI chip (avoid Prolific/CH340 clones as they cause "communication timeouts").

Double-click a channel number to open its configuration window.

Select the exact COM Port number identified earlier in Device Manager. Click OK. 3. Reading the Radio Data Motorola GM360 is programmed using the Motorola Professional