Keep your feet flat on the floor. Do not cross your legs or ankles.
The RAK283 logs your historical data automatically to help you track trends over time. Viewing Saved Measurements Ensure the monitor is turned off.
The port located on the side of the device where the cuff tube connects. Powering the Device The RAK283 can be powered using two different methods:
Press the button. The monitor will beep, and the screen will briefly flash all display characters. rak283 blood pressure monitor user manual
Clean the monitor with a soft, dry cloth. Do not use abrasive cleaners.
Press again to scroll backward through individual past readings, starting from the most recent. Clearing Stored Data Press MEM to enter the memory view mode.
Proper care will ensure your RAK283 provides years of reliable service. Keep your feet flat on the floor
With the device powered off, press and hold the button for 3 seconds until the user icon flits on screen.
: While in the setup menu, you can cycle through volume levels (1, 2, 3, or OFF) using the MEM button.
(for regions without local distributor): Viewing Saved Measurements Ensure the monitor is turned off
Do not twist, fold, or tightly kink the rubber air tube. Avoid dropping the monitor or subjecting it to heavy physical impacts.
Rest your test arm on a flat surface (like a table) so that the upper arm rests naturally at the exact level of your heart. 🦾 Applying the Upper Arm Cuff
A color-coded scale (Green = Normal, Yellow = Mild Hypertension, Red = Severe Hypertension) running along the left edge of the screen, mapping your results against World Health Organization guidelines. Managing Memory Functions Viewing Past Readings While the monitor is powered off, press the MEM button.
The screen will briefly flash all symbols, and the pump will begin inflating the cuff automatically. Remain perfectly still and breathe normally.