Resetter Printer Canon G2010 -

Here is the critical point: Instead, it uses a software counter. Every time you clean the print heads, the counter increases. Canon programmed the printer to hard-lock at a specific number (usually representing 15,000 to 20,000 pages) and display an error.

: Press the Setup button, then use the + button until " C " appears on the LCD. Press Black or Color to initialize the settings.

If you reset the software counter without replacing or cleaning the physical pads, the waste ink will eventually overflow. This can cause permanent stains on your desk or short-circuit the internal electronics of the printer. resetter printer canon g2010

Close the service tool. Turn the printer off using the Power button. Wait 10 seconds, then turn the printer back on. The error lights should disappear, and the printer should function normally. Run a single nozzle check or print a test page to confirm operation.

If you reset the counter multiple times without cleaning or replacing the physical waste felt pads underneath the carriage, the ink will eventually overflow out of the bottom of the printer cage. This can stain your furniture or, worse, short-circuit the internal power supply board. Here is the critical point: Instead, it uses

The software window will open. Look for the tab at the top.

You must connect the printer to your PC using a standard high-speed USB printer cable. Do not use a wireless connection or a USB hub , as this can interrupt data transmission and permanently corrupt the printer's firmware. : Press the Setup button, then use the

In summary, resetting the waste ink counter on a Canon G2010 is a straightforward process using a service tool, but it should be performed with an understanding of the underlying hardware limitations. By following the steps carefully—entering service mode, running the tool, and resetting the counter—you can quickly restore your printer to working order. However, responsible printer maintenance includes monitoring physical waste ink levels to prevent future damage. This combination of software reset and hardware awareness ensures your Canon G2010 continues to provide reliable, low-cost printing for years to come.

While still holding , release the Stop button and press it exactly 6 times .

A "resetter" (specifically a waste ink pad counter resetter ) is a small software utility designed to reset the internal counter of your Canon G2010 printer.