Even experienced techs misread the Levant manual. Avoid these:
However, I can help you in several practical ways:
The main motorized chassis that rides along the rail. thyssenkrupp levant stair lift installation manual full
High-quality power drill with wood/concrete bits matching your flooring material.
Push the rail assembly against the wall or baseboard, then pull it out approximately 1.5 to 2 inches (40-50 mm) to allow clearance for the seat back. Step 3.3: Anchoring the Rail Even experienced techs misread the Levant manual
on the stairs to check the length. If the rail is too long, it can be cut from the bottom end using a circular saw with a metal-cutting blade.
The rail must be assembled on the stairs before attaching it permanently to the steps. Step 1: Lay Out the Rail Sections Push the rail assembly against the wall or
The Levant uses a heavy-duty extruded aluminum rail. Depending on the total length of your staircase, the rail will arrive in two or more sections that must be spliced together seamlessly.
If you are encountering unresolved error codes or mechanical binding, stop operation immediately and consult an authorized ThyssenKrupp (now TK Elevator / Access BDD) certified service technician.