Remove the lower center console (around the gear stick) to gain access to lower supports. Phase 2: Instrument Cluster and Upper Dash
: Ensure all wiring harnesses follow their original factory routing paths. Use zip ties to secure loose lines so they do not get pinched by structural metal brackets or cause annoying rattles while driving.
Open the glovebox and remove the screws along the upper and lower interior edges. Once the screws are out, the entire box can be pulled forward. Passenger Airbag: vw polo 6n dashboard removal updated
Reassembly tips
Remove the lower center console section around the gear shifter. Remove the plastic caps near the footwells to reveal the securing screws, then slide the console section backward and out. Remove the lower center console (around the gear
Once loose, lift the dashboard slightly upwards to clear the steering column bracket, then pull it straight back toward the front seats. It is highly recommended to have a second person help you lift it out through either the driver or passenger door. Reassembly Tips
Many DIY mechanics crack their dashboard by pulling it before removing the bulkhead fasteners. Open the car bonnet. Open the glovebox and remove the screws along
Switch Gear: Pop out the hazard light switch, rear demister, and any blanks. Unplug the connectors and tuck them back into the dash.
Forumowiczki i forumowicze zgłaszają kilka powtarzających się problemów. Warto być na nie przygotowanym: