You must first ensure your hardware is ready to receive the wake-up signal. Enter BIOS/UEFI : Restart your PC and repeatedly press during startup. Enable WoL
Text began to appear, typed at an inhuman speed.
To use this feature, your environment must meet several criteria: wake on lan anydesk hot
AnyDesk must be installed (not just run) and set up for unattended access. Enable Wake on LAN | Quick Windows Guide + Fixes!
: Open AnyDesk on the machine you want to wake. Go to Settings → Wake-on-LAN and select Enabled . You must first ensure your hardware is ready
The final step is enabling the feature within AnyDesk on both the computer to be woken and the "Guardian Device".
Even after configuration, Windows power management might override your settings after a restart or Windows update. Always double-check the settings in the tab to ensure both checkboxes ("Allow this device to wake the computer" and "Only allow a magic packet to wake the computer") remain checked. To use this feature, your environment must meet
As mentioned in the setup guide, Windows' Fast Startup feature can prevent the system from fully shutting down, which is necessary for WoL to work correctly in S5 state. Disabling this feature is a common fix.
While incredibly useful, Wake-on-LAN has security implications that must be considered.
If your router has no WoL feature, you need a tiny device on your home network that stays on 24/7 (a Raspberry Pi, an old Android phone, or even a second low-power PC).
Under the tab, check both "Allow this device to wake the computer" and "Only allow a magic packet to wake the computer". 3. Disable Windows Fast Startup