Xinje Plc Usb Driver Install -
Connecting your PC to a Xinje PLC requires a properly installed USB driver. Without it, your programming software cannot communicate with the hardware.
software, look in the corresponding installation folder for the USB_Driver directory. 🔌 Step 2: Connect the Hardware Power on your into the PLC and then into your computer.
Method 1: Installing the Driver via Xinje Software Folder (Recommended)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. xinje plc usb driver install
You should see your device listed cleanly as or "USB Serial Port" , followed by an assigned port number (e.g., COM3 ).
Modern versions of Windows (10 and 11) enforce strict driver signing policies. If Windows blocks the Xinje driver: Restart Windows in mode.
Windows will attempt to recognize the device. It will likely show a notification stating "Device driver software was not successfully installed" or list it as an in Device Manager. Connecting your PC to a Xinje PLC requires
: Always cut off external power before performing initial wiring or connecting expansion modules.
Green text streamed into the log window: firmware version, module status, digital I/O states. The PLC and SCADA synchronized smoothly. Arman committed the installer and a hash of the file to the maintenance notebook, along with the exact COM port mapping and the steps he’d taken, so the next tech could replicate the process without guesswork.
Navigate to the top menu and select > Communication Settings (or Communication Config ). 🔌 Step 2: Connect the Hardware Power on
Before beginning the installation process, ensure you have the following components ready:
Use this software for older XC1, XC2, XC3, and XC5 series PLCs.
Right-click on the unrecognized Xinje device and select . Choose the second option: "Browse my computer for drivers" .
